Stand Setup Instructions
This is the way the stand will come to you, folded up and ready for you to setup for your airplane.
Hold the top shelf away from you and push the outside legs out and away until the stand will standup by itself.
Fold the bottom shelf down on the lower crossbrace and secure it with the bolt in the shelf bracket. Put the bolt thru the crossbrace and then thru the shelf bracket. Secure it with the washer and wing nut.
Fold the top shelf back toward you and over the top until it rests on the upper crossbrace.
Remove the fuse saddles from the front upper crossbrace. Remove the bolts and turn them around so they come in from the smooth side as shown. The holding bolt head will be on the outside and wingnut and washer on the inside of the leg.
The saddle will sit on the upper shelf arm and secure the saddle and shelf arm in place. Tighten securely!
Now your stand is ready for use! Just reverse the directions and your stand will be ready to be packed up for the next trip to the field.
The bottom shelf bracket makes a good handle to carry your stand or turn it around and the upper shelf is available as well. It balances evenly and is easy to carry and store in truck, car or trailer.
Thank you Brandy for the display help!
Ed
Caution: If you plan on starting your engine while your plane is in this stand, be SURE you have weight on the bottom shelf to keep the stand from tipping and someone holding both the plane and stand>>>>>>>>>>>
I do not recommend starting an engine in these stands, if you do, be sure someone is holding the aircraft and stand so it will not tip forward if the throttle is increased!!!!!!! Please heed this warning!!!!